Screw Thread Insert Tool Kit M20*1.5 manufacturer from China XinXiang CL Metal Products Co.,Ltd

Price:	5.0~10.0 USD
Payment Terms:	T/T
Place of Origin:	Henan, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: M20*1.5

Production Capacity: 50000 pre day

Delivery Date: 5-10days

Type: Hand Tools

Brand Name: CL

Materials: HSS

Classification: Helicoil kit

Means of Transport: Air

Packing: Steel Box/Plastic Box

Application: Others

Package: Box

Certification: ISO9001:2008

Standard: GJB

Pack: Steel box

1. helicoil inserts
2. helicoil kit(tap/spanner/drill/punch and some helicoil inserts)
3. 304SS/HSS
4. ISO9001 products
5.Wholesale

CL-Helicoil Materials:

Materials	Mark	Tensile Strength	Working Temperature		Surface
Stainless Steel	1Cr18Ni9 1Cr18Ni9Ti 00Cr17Ni14Mo2	>1400MPa	Short	Long	Non-Cladding With Lubricating Cadmium Plating Silver Plating
Stainless Steel	1Cr18Ni9 1Cr18Ni9Ti 00Cr17Ni14Mo2	>1400MPa	425ºC	315ºC
Aldary	QSn6.5-4	>1000MPa	300ºC	250ºC	Non-Cladding Cadmium Plating
Super Alloy	InconeIX750	>1400mpA	750ºC	550ºC	Non-Cladding Silver Plating

Screw Thread Insert Tool Kit Tools:

DRILL

Drill out the damaged threads using the drill supplied in the kit. Drill to a sufficient depth toaccommodate the insert length and the bolt or screw being used.

TAP

Tap the hole using the Heli-Coil tap supplied in the kit. Check the size on the shank of the tap to be sure it is the right size.Tap the hole to sufficient depth to accommodate the insert length and bolt or screw being used.

NSTALL

Install the appropriate length insert from the kit. Use the installation tool supplied in the kit or set. Wind the insert into the hole until the top coil is1/4 to 1/2 turn below the top surface.

TANG REMOVAL

Remove the tang by using the tang break-off rod (when supplied with the kit) or a punch which fits the inside of the insert. Place the punch or rod squarely on the tang and strike sharply.

For insert over 1/2 inch, 12mm, or for spark plug inserts, use long nose pliers. Holding the tang with the pliers, bend it alternately in and out until it comes free.